Paslode 013060 Impulse Cleaning Kit for the Paslode Impulse guns

Product Information

Most importantly, there’s no risk of damaging the nailer’s plastic, rubber,and electrical parts. ALSO READ: paslode nail gun repair manual So your Paslode’s now clean – hopefully it seems refreshed. But is it firing like it should? As well as regular cleaning, your nail gun also needs new spare parts fitted every now and then. The o-rings, battery pads, filter, etc. get worn out and need replaced. Any of the two substitutes we have explained here will do the job and can be a good way of saving your hard-earned money. Is your nailer not firing properly? See our handy Paslode Troubleshooting Guide to help you diagnose the problem.

The videos below from Paslode demonstrate how to properly clean and lubricate your nailer. They’re easy to follow with simple instructions. Here are some great options if you’re looking for an equally powerful but cheaper Paslode degreaser cleaner alternative.. Paslode degreaser cleaner alternative – 2 recommended options that work as well

How to Clean a Paslode Nail Gun

Regular cleaning (depending on use) is essential to keep your Paslode nail gun firing and running smoothly. Something else: You’re advantaged when you use the recommended paslode cleaner and oil – it’s specially engineered for the tools and cleans wonderfully.

Now spray the filter and wipe it clean either with a lint free cloth or by blowing through with air.Don’t worry if a small amount of smoke comes out from your nailer – this is normal. Your Paslode Also Needs Regular Servicing

Side Note: Please follow the instructions printed in the manual for your specific Paslode model all through. This video shows you how to clean a Paslode finish nailer (IM65, IM65A, IM50) or multi-purpose nailer (IM45): This video shows you how to clean a Paslode framing nailer (IM360Ci, 360Xi, IM350) or positive placement nailer (PPN35Ci, PPNXi): This prevents you from spreading dirt or scratching the internal parts of your nail gun. Make sure you properly tighten all screws when reassembling your nail gun. We’ll expertly test, clean, service and repair your nail gun, then return it to you working like new again. A service and repair is a worthy investment for maintaining your Paslode’s performance. After all, you don’t want your work to suffer! What’s included in our Approved Paslode Service?Next, disconnect leads from your fan motor and the spark plug to reach the tool’s cylinder head assembly. Records the default button state of the corresponding category & the status of CCPA. It works only in coordination with the primary cookie. Don’t think of carb degreaser cleaner though- it has some terrible ingredients and hardens or dissolves plastic, rubber, and the like.