Fiskars Paper Circle Cutter

Product Information

The Dremel is cutting in a fixed position as you move it in a circle. It shouldn’t deviate from the circle you drew, even if you aren’t pushing it in a perfect circle. Please note: Age restrictions apply - This item is not suitable for those under the age of 18 years.

Draw the circle on the surface that you’re going to cut. If you already have your measurements or outline, great! Otherwise, use a measuring tape to calculate the diameter of the circle you want to cut. Hold the measuring tape up to the surface and draw a dot at the center point. Then, use a compass or stencil to outline the surrounding circle. [8] X Research sourceDoes exactly what it was designed to do, and flawlessly. An amazingly high quality tool for which you will find endless masking applications in your hobby, from wheel hubs to inner radius curves for canopies etc. You really should treat yourself! Cut perfect circles every time with this fantastic circle cutter with adjustible head to create circles from 10mm up to 300mm. The lid is a seriously snug fit, and once you overcome the suction when you remove it, you’ll find a removable tray with foam cut-outs. This contains three different cutting tools in their own plastic box, tool assembly components and a screwdriver. Yes, you will need to assemble this cutter, but it won’t take more than a few minutes. For information, the tray lid tells you the cutting angle for each blade. These are colour-coded for ease of recognition.

Keep a firm grip on the Dremel, especially if you’re cutting a circle out of the material entirely. If you let go of the tool once the material falls out, you’re going to have an expensive and dangerous piece of equipment falling to the floor and potentially cutting your feet. This article was co-authored by wikiHow staff writer, Eric McClure. Eric McClure is an editing fellow at wikiHow where he has been editing, researching, and creating content since 2019. A former educator and poet, his work has appeared in Carcinogenic Poetry, Shot Glass Journal, Prairie Margins, and The Rusty Nail. His digital chapbook, The Internet, was also published in TL;DR Magazine. He was the winner of the Paul Carroll award for outstanding achievement in creative writing in 2014, and he was a featured reader at the Poetry Foundation’s Open Door Reading Series in 2015. Eric holds a BA in English from the University of Illinois at Chicago, and an MEd in secondary education from DePaul University.Keep collections to yourself or inspire other shoppers! Keep in mind that anyone can view public collections - they may also appear in recommendations and other places. Turn the Dremel on and push it around the circle you drew. Place one hand on the front half of the Dremel and your other hand on the trigger. Turn the Dremel on and slowly push it around the circle you drew. Apply a light downward pressure to keep the pivot foot firmly planted in the pilot hole and the guide line flat against the surface you’re cutting. Lead the cutting bit around the circle to make your cut. [13] X Research source